Fan covers can get dirty sometimes due to the constant exposure of air with dust. Cleanliness of fan covers is required from time to time.
Otherwise, when a lot of dust gets stuck inside the fan cover, it will eventually affect the fan’s performance.
A dirty fan covered in dust doesn’t function well. And if your exhaust fan is choked with dust, excess moisture has nowhere to go—which eventually will lead to mold and mildew.
If we talk about a broan bathroom fan cover, rather than replacing it with a new one, you can easily remove it, clean it and then fix it back to its original position. This will save you from the cost of getting a new fan cover.
If the fan cover is full of dust, it can adversely affect the fan’s performance. Eventually, your ventilation process can fail.
It is suggested that you clean the bathroom fan cover every six months to take full advantage of the fan performance.
In this blog, I will help you to remove the broan bathroom cover instead of replacing it. You only need to follow few basic steps, which are time and cost-saving.
All you need to do is, remove the screws and clips that are holding the cover firmly. In this way, the cover will slide out, and you can clean it easily.
Steps To Remove The Fan Cover
Now, let’s look and follow the steps written in this article, and you will get the job done.
Turning Off The Electricity Switch
First, whenever you are working or handling any electric device or gadget, you need to cut down its electricity supply. It will save you from all-electric hazards.
You do not need to take risks while doing the work. While working in the bathroom, to remove the fan cover, cut off the main supply of electricity to the bathroom.
Before switching off the main electricity supply, have a torch with you and a balanced stool to stand on.
Now, I assume that you have done all these things and are ready to get things done.
Removing The Broan Bathroom Fan Cover
First and foremost, you must check for any screws and clips through which the cover is attached. It also depends on the kind of model that you are having in your bathroom.
Broan bathroom covers usually do not come with clips, but don’t pull the cover without double-checking for screws and clips.
When it’s time to pull it down, do not pull it with full force and in a harsh way, it may cause breakage to the body of the cover, and you do not want that to happen.
Watch out for all the screws, carefully lose them all and place them in a safe place because you will need them again to fix the cover back to its original place.
Replace The Bathroom Fan Cover
Here comes the most important work for which you have removed the fan cover in the first place. You can clean the cover with a damp towel and with the help of a brush.
At this point, if you need to replace it with a new cover, then this choice is yours. It is a very simple task, which requires no assistance from an electrician.
Cleaning Of Broan Bathroom Cover
Now we will talk about the cleaning of the broan bathroom cover in detail:
Clean The Vent Cover With Soapy Water
Cleaning the cover is very easy. You need to fill your sink with warm water. Then, add few drops of dish soap into the water.
Put the cover into that water and allow it to soak for some time. Now, please take out the cover and clean it with a dry towel or any clean cloth.
Scrub it to remove all the dirt, dust, and mold. Now place the cover on the floor so that the air dries with time.
Use Vacuum To Get Rid Of All Dust On Exhaust Fan
Before touching the exhaust fan, you need to unplug the standard two-prong switch that powers the fan. To be extra careful, you can switch off the power to the bathroom from the circuit breaker.
Once you are confident that now the electricity supply is cut off, it is time to clean. You can start it by rubbing off the dust with the help of a vacuum.
For cleaning the dust off the motor pieces, use any brush with bristles.
Remove Grime With A Damp Cloth
Once you see that the dry dust is removed, you need to move onto the next step. You may have noticed that the exhaust fan is still dirty with grime.
Take a damp microfiber cloth or towel and wipe down the fan components to remove any remaining dirt.
Are you looking to perform a deep clean? Don’t be afraid to dismantle the fan further. It depends on your fan’s model, unscrews all visible screws, and takes out the motor from the fan’s casing.
Now let’s restore the fan blades and clean all motor parts with a damp microfiber cloth.
Reassemble The Exhaust Fan
Now that you are done with all the cleaning, your fan and fan cover must be shining, increasing the efficiency of the fan performance. It is time to put the fan back in its position.
If you removed the motor, now put it back with the help of screws. Plugin the switch to check that how it is working. Now that you have restored the power, switch off the button again to replace the cover.
Put the cover back by inserting the wires back to their original slots and gently push the cover into its place.
Frequently Asked Questions
How do you remove a vent fan cover?
To remove the vent fan cover, gently pull down the cover to fully see the fan. Then, squeeze the metal mounting wires on any side and slide them out of their slots.
How do I clean my bathroom exhaust fan without having it removed?
It is a very easy process, and you can do it anytime. Prepare a mix of water and soap. You can also take two tablespoons of baking soda and a cup of warm water. Put on gloves.
Use the above mixture with the help of cotton cloth or towel. Scrub the fan wings first and then the rest of the body.
Do bathroom fans need cleaning?
Yes, your bathroom exhaust fans need to be cleaned regularly. It would be best if you avoided the dust being piled up in your bathroom fan covers.
Bathroom fan cover cleaning only takes about 20-25 minutes. You need to have a few necessary things and tools beforehand.
Can I replace a bathroom fan all by myself?
The answer is yes. An exhaust fan installation is something that you can easily do. Either you want to install a new exhaust fan, or you may be simply want to put up a new broan cover.
It is work that you can do by yourself. A bathroom vent is an important part of your home’s ventilation system.
You can do it by following some very simple steps. You can also watch any sort of DIY video.
What causes my bathroom exhaust fan to stop working all of a sudden?
The machinery of any sort can stop working all of a sudden. If we talk essentially about the fan, a fan is built up with an electric motor and sharp blades.
When the bathroom exhaust fan stops working, it may be due to two reasons; the fan is receiving not enough power and the second reason is the motor may be burned out.
You can also lookout for a circuit breaker or call an electrician if you don’t understand why the fan stopped working.
Conclusion
There must be a couple of reasons for which you may want your broan fan cover removed. You may have a greasy fan cover, or maybe you want to replace it with a new one to create a different look.
Whatever your reason is, it is always necessary to clean your electric appliances from time to time, especially the fan grills. Because the grill attracts dust in the air, you can clean the grill every six months.
The steps to remove the grill are explained in detail in the article. You can easily do it on your own.
Read Also
- Bathroom Exhaust Fan Blowing Air Down | The Cause And Solution
- Best Extractor Fan For Large Bathroom | Reviews
- Separating The Bathroom Fan And Light Switch | A User’s Guide
- How To Clean Bathroom Exhaust Fan Duct? | Step to Follow
- Bathroom Exhaust Fan Leaking Water When It Rain? | How To Fix
Leave a Reply