The falling of bathroom tiles can be a real problematic issue for any homeowner.
Not only the washroom looks unpleasant, but it can also lead to many other major problems if left unaddressed.
So, now we will talk about the real cause behind the falling of your bathroom tiles.
What are the underlying problems that become the cause of the falling down of tiles?
What can you possibly do to get over this problem?
This is a serious issue, and we have often heard from people that if one piece of tiles comes off the surface, the other one is also likely to cause a problem.
Causes Behind The Falling Off Tiles
The most common cause behind the mysterious falling of tiles is the Water Infiltrations.
If water got the chance to penetrate behind the tiles and in the grout, then there is a clear chance of mold to grow behind, which eventually leads to the deterioration of adhesive. The end result would be falling off the tiles.
This is not just an alarming sign for your bathroom but also can take a toll on your health.
The other most common cause that we observed is simply Exposure to hot water. You obviously can not stop using hot water, but you need to look at solutions.
Other causes behind falling off the tiles can be:
- Tiles were not aligned properly. A smooth surface is ideal for the installation of new tiles.
- Tiles were not properly cleaned before placing onto the walls. Chalkdust on the tiles can later penetrate behind the tiles and interfere with the sticking material.
- The contractor used an adhesive that was not water-resistant.
- Hot water was exposed to the tiles before the 24 hours had passed. New tiles are supposed to be dry for at least 24 hours.
- The tiles were not grouted perfectly, which eventually led to water from the sides into the surface.
Now we can see that the prime cause of this problem is the installation of bathroom tiles.
So, let’s talk about some solutions regarding the repair of fallen bathroom tiles:
How To Replace Fallen-Off Bathroom Tiles?
Bathroom tiles are well built and hence durable. But with anything else, they too can be affected by improper installation.
Many people do this thing where they split the loose ends of the tile from the surface, sand them, fill in the new adhesive and then place the tile back to its position. This is a lazy and cheap method to get the tile fixed. But it is not recommended.
If you are constantly struggling with loose or broken tiles, here is a quick step by step guide to fix your issues:
Step 1: Remove The Tile
If your bathroom tile has not fully fallen off, you need to remove the remaining half-broken tile from the wall. Even if the pieces are small and shapeless, don’t leave any remaining pieces stuck on the wall.
Read Also – How To Remove Paint From Tile In Bathroom?
Clear the surface properly. New installation of tile requires a clean surface with no remaining pieces of former tile. Be careful while removing the tile; other tiles should not be affected by this process.
Then water the surface, it will loosen up everything, and eventually, the bits fall off easily from the wall.
Step 2: Installation Of The New Tile
Before anything, you need a perfect-sized tile to do your job. While visiting the hardware store, you need to have the right measurement beforehand.
Make sure that the new tile fills in the gap well and does not look odd. Before the installation of the new tile, you also need to carefully choose an excellent adhesive.
Every adhesive in the market has a different and specific purpose. While installing the bathroom tiles, it is highly recommended that you use an adhesive that can stand water – in easy words, a water-resistant adhesive.
Now you have chosen the specific adhesive, it is recommended that you apply a thin layer of adhesive behind the tile.
Now, hold firmly into the place for 30 seconds until you feel like it’s attached already. Most of the work is done here, but we are not finished yet.
Step 3: Grout The New Tile
By performing the grout duty, your tile edges will become water-resistant and tight. This will increase the lifetime of the tile.
But before grouting the edges, you need to wait for at least 3 hours so that the adhesive you put gets dried off properly.
You can perform grouting in two ways:
With the sanded grout or with the un-sanded grout.
You need to mix the grout with water to make a paste. Spread it on the tile, past the edges. It should spread evenly. Allow it to dry for 30 minutes, and then wash it off properly.
Step 4: Let The Grout Cure
At this stage, there is nothing left for you to do. Just leave the tiles to dry off for at least 24 hours.
This time length will make sure that the tile stays firm in its place.
Frequently Asked Questions
What happens when water gets under my bathroom tiles?
When water goes under your tile, it causes the underneath surface to swell and warp. Tile loses its grip with the wall and comes out from the surface either in pieces or full.
Is there a chance of mold growing under my bathroom tiles?
Yes, there is a high chance that mold can grow under your tiles. If the tile is not properly sealed, water and moisture can penetrate inside and be a reason for mold growth.
How do you know if the tile has water damage?
The tiles will start to discolor and swell if there is the presence of water inside the wall. The tile may start to split apart. If these signs appear, then there is a chance that water has done the damage.
Can water seep through tile?
Yes, water can seep through the edges of tiles. To avoid such incidents, a silicon sealant should be used to seal the edges of the tiles. In this way, the edges get sealed, and water does not penetrate.
Conclusion
Leave the tile to rest for at least 24 hours. This way, the tile will become more durable and will stay firm in its place.
There are ways through which you can prevent the damaging and falling of tiles.
- Clean your bathroom a little every day.
- Spread the cleaner evenly on the surface.
- Scrub the surfaces and even the corners.
- Rinse every cleaner with an adequate amount of water.
- Kill molds.
- Attack the stubborn stains.
These are the ways through which you can protect your bathroom tiles from damage. But if damage occurs, this step-by-step guide is a quick and effective method to get your issue fixed.
This method can be done by anyone from home without getting any outside help. This method is efficient and cost-effective.
Read Also
- How To Remove Paint From Tile In Bathroom?
- How To Cover Ceramic Tile In Bathroom? | 5 Steps To Follow
- How To Clean Mould Off Bathroom Sealant | Causes & Solution
Leave a Reply