A sink would not stay firmly in the bathroom provided it is properly sealed. It is essential to use the seal in the sink to keep it in place.
A new sink needs it for fixing, and the older one requires an excellent seal to stay in place.
If the seal goes off, there are chances that you are likely to see the sink falling down. It works like the glue that keeps the sink fixed to the wall.
If you are installing a sink or fixing the problem with the old one, then here is the step-by-step guide to sealing the sink:
- Make sure to clean the surrounding area of the sink. Rinse it thoroughly to make sure that no residue is left anywhere on the sink.
- Take the sealant tube containing silicon sealant. Make a cut according to the crack’s width that is there between the sink and the wall.
- Place the tube inside the mastic gun and use the trigger to let the silicon sealant come out securely.
- Remove the additional sealant from the surface. Add the silicon in between the space in the thick bead form.
- The final stage of the sealing is critical. It includes the smoothing out of the sealant on the surface.
- Mix the washing liquid and the water in 1:1 proportion. Use your finger after dipping into the liquid to smooth the bead of silicon.
The smoother the surface of the bead, the more impressive it will become.
The bathroom sink seal is integral to the support of the sink against the wall. It is very important to use it entirely.
If you cannot handle the task yourself, it is better to look for professional advice.