Tightening the toilet bolt is a skill in itself. The bolt in the toilet serves several purposes.
These bolts keep the different parts of the toilet seat intact and keep it firm against the floor.
What matters the most in this regard is the way that you tighten the bolts.
It is not important to tighten them to the extreme levels but what matters the most is how well you tighten these bolts.
Tightening does not mean that you keep using the screw tightened until the bolt is close to breaking.
What is very important is to ensure the proper extent of tightening. It needs to be tight enough to a level where the toilet would stay stable and not wobble while using it.
If you are tightening the bolts and come across the sound of metal touching the porcelain, immediately stop tightening the bolt.
On the other hand, if you feel that the bolt is just in the wax ring, let the tightening continue till you hear the bolt’s sound touching the porcelain.
How To Tighten The Bolt?
Make sure to use oil for lubricating the nuts and the bolts.
Start tightening the bolt with your hand. Continue tightening until they reach the flanges. In case you are using the air wrench to tighten the nuts, exert minimum pressure.
Take care of the bolt order and keep sequentially adding them.
Caulk can help you keep the toilet secure against the floor. The bolt secures the toilet, but the caulk secures these bolts.
The best way to use caulk is to securely spread it all around the toilet with a one-inch gap left at the back of the toilet.
What Should Be The Size Of Toilet Bolts?
The toilet bolt serves as a watertight seal that can hold the toilet bowl and the flange together. In this way, the toilet can stay secure against the floor.
There should be a safe distance between the wall and toilet bolt. This distance needs to be 10 inches, 12 inches, or 14 inches.
The most common measurement of the distance is 12 inches.
Conclusion
The wobbling tank indicates that a certain bolt in the toilet is loose. If you can identify the problem, it is better to address the problem immediately.
The most appropriate solution is to tighten the bolts. Start with bit by bit tightening and keep checking the toilet if it is wobbling or not.
Make sure that the bolt is neither too tight nor too loose. If the bolt is too tight, there is a chance that the wax ring might break.
If it stays loose, that toilet will not fix the way you want.
Read Also:
- Are Toilet Tanks Interchangeable? | Points To Remember
- 7 Best Toilet Wax Ring Reviews | Great For All Toilets
- 10 Best Toilet Flush Valve Reviews| Save Water Bills
Leave a Reply