There are several reasons for which you may need to connect a water hose to the bathroom sink.
This kind of connection helps provide access to the water source.
After connecting the pipe, you can take water to the terrace, backyard, or any other place in your home.
The task is not tedious, and you can connect it easily to the faucet. All you need is to establish a connection through a reliable hose adapter.
It is a step-by-step procedure that removes the aerator and ends in fixing the hose to the bathroom sink faucet.
How To Connect The Water Hose?
There are different ways to connect the hose to the faucet. The top three options available are:
- Using the water bandit
- Fixing with the level adapter
- Using a reflexed rubber fixture
Connecting With A Water Bandit
There are several ways to establish the connection, but one way is to use the water bandit. It is a flexible method that prevents leakages even when the water is at a higher pressure.
It comes with a standard thread that makes it just the perfect choice for the hose attachment that can stay in the bathroom for a long time.
Fixing With The Level Adapter
This is another way to fix the water hose to the faucet. It is a special kind of adapter that comes with a lever.
This will press the tap down the rubber ring; thus, it creates a stronger seal. There is nothing bad about these connections but some limitations to this connection that you need to know.
It is just the right choice for the faucets with a 90-degree angle. The diameter needs to be of a smaller range too.
If you are choosing the faucet with an exact size, it will create just a perfect seal. Despite how well it fits, there are chances of leakages under high pressure.
The other downside is the price. These adapters are quite expensive.
Using A Reflexed Rubber Fixture
The most common option available to attach the hose to the faucets is the flexible rubber bell. It folds internally and then creates a flexible seal that will match with a wider range of taps.
This kind of installation has two downsides. One major concern is that it goes with only small-sized hoses.
It is quite a huge challenge when you try it with standard-sized hoses. The second downside is the chance of leakage.
This leakage is reported even when the pressure is too low. This might not be too effective in the case of bathtubs.
On the contrary, it is just the perfect choice for using over the sink or any other surface from where you want to get the water.
Read Also – Best Bathroom Sink Cabinets
The Cleaner Choice For Connecting
The plumbing experts prefer using the water bandit for the connection. Here are the reasons they quote in favor of the bandit:
- It is just the right choice that can fit with different kinds of faucet designs.
- If you are looking for something that can go with the threaded garden hoses, this is just the right choice.
- There is nothing to worry about the leakages when the water pressure is too high.
- It will not cost you much.
For these reasons, most homeowners use water bandits to connect the hose and the faucet.
Reliable Connections
Most of the users prefer connecting the hose and the faucet with the help of a water jack. It is not necessary to acquire additional accessories along with it.
Read Also – Removing The Faucet Handle Without Screws | A User Guide
If your faucet is not universal or you live in an area with water pressure issues. In that case, you may need a metal cable tie that can be tightened with screwdrivers.
These connecting aids are readily available in any hardware shop. Once set up, it will guarantee a reliable connection.
After some time, the hose starts getting lose, and there are chances that the water bandit will get detached.
You can resolve the problem by adding reinforced water-proof tape.
Connecting The Hose And The Faucet
If you are trying to connect the hose and the faucet, there are few things that you need to know before proceeding towards the actual steps.
Removing The Aerator
Plug your sink first before removing the aerator. Faucet aerators are made of a rubber washer, casing, and small screen.
These parts are small enough, but you need to keep them safe while you are removing the aerator.
Read Also – How To Clean The Aerator On The Kohler Bathroom Faucet?
It may happen at times that while removing the aerator, these parts can sweep into the drain. Make sure that the drain is properly covered.
You can add a stopper or a cover to keep things secure.
Turn the aerator in an anticlockwise direction. Most of the aerators are reverse-threaded. Most of the time, the aerators are not firmly tightened.
You can easily remove it with your hands and without needing any tool. In case the aerators are in place for many years, it can be hard to open them. In this case, you need a set of pliers.
If you do not want to change the aerator, get it masked with masking tape. This will keep the finishing protected.
For a stuck aerator, you can switch to rubber strap wrenches instead of pliers. For a dirty aerator, you need white vinegar and WD-40 to clean it up.
Removing Adapter
After the aerator is removed, it is time to attach the faucet hose and the faucet spout. After you have fixed it into the opening of the faucet spout, make sure you have screwed it properly.
After disconnecting the garden hose, the adapter can be used as an efficient faucet aerator.
If you have never removed the adapter before, then do not worry. It is not a tough job to handle. All you have to do is unscrew it.
In case it is stuck, you can look for alternative measures too. Once you are done, you can screw it back by rotating it in a clockwise direction.
Different Types Of Adapters
If you are trying hard to work with a standard adapter, but it is not helping you out, you need to get a straight-neck faucet. Such faucets are usually 1 1/4 inches deep and wide.
To remove the male hose connector, you need to open the pressure lever by flipping it. Make sure to turn the adapter in a clockwise direction.
There is a specialized Koala adapter that you can slide into the faucet. Now turn the adapter in an anticlockwise direction and flip the cover to get it closed.
In the next stage, you have to screw the male hose into the present hose. Keep moving the Koala into the faucet until you hear a clicking sound.
Snap adapter is another available choice. It comes in two pieces. One of the pieces will let you replace the faucet aerator, while the other will get connected to the garden hose.
This kind of adapter requires the user to be quick. A quick-connect is something that you need to use for connecting the garden hose properly.
The purpose of using the quick connector is to make sure that the faucet and the hose get connected without any inconvenience.
A Step By Step Guide
Part 1: How To Get The Hose Attached?
Finding the right faucet adapter: It is a small tool that you can use to screw onto the faucet. After you can choose the adapter that fits well into the faucet and makes it look like a male garden hose fitting.
Removing the faucet tip: The faucet tip needs to be handled carefully. It is made with certain pieces that you need to keep safe. It is better to spread a towel or any other piece of fabric underneath so that you can catch all the pieces dropping down. This way, all the pieces will stay intact, and you will not lose them once they’re needed back.
Fixing the new faucet adapter: Check that a good seal is created between the faucet and the hose. You will also need no tools to tighten it properly.
In connections where the vacuum breaker and the plumbing system are not well integrated, you need to get a hose-type vacuum breaker before starting with the connection of the garden hose.
These hose-type vacuum breakers are readily available in the hardware stores and can be bought without any inconvenience.
This is essential to keep the siphon from getting inflicted with the unhealthy and the unsafe and not mix into the clean drinking water. This mixing does not happen even if the hose is left behind submerged in a pool of water.
The results will not be much different if the container consists of cleaning chemicals or contaminated unpotable water.
Placing the hose gasket securely: There must be no leakages reported in the connection. Otherwise, you will have to spend a great deal of time correcting the leakages. Use a rubber or vinyl gasket in the hose.
This will keep the hose gasket in the right place all the time. The gasket must be in the stocking, too, before you fix the hose with the faucet. If you are not too careful, you will feel a mess on your hands.
Attaching the hose: It is time to screw together the hose and the faucet adapter. It needs to be screwed firmly so that you can enjoy a watertight seal.
Part 2: Getting Back The Faucet Tip
- After you have used the hose, make sure to replace the faucet tip. Take off the hose and faucet adapter. You can now screw back the faucet tip securely to be a reliable seal for future use. Switch on the faucet to make sure that there is no leakage. If you have not sealed it properly, then you may experience leakages from the replaced faucet tip. Therefore make sure that the replaced seal is as secure and high quality as is the original one.
- Use quality tape to fix the faucet in place. To stop any leakage, remove the faucet tip. Make sure to add two to three layers of tape in a clockwise direction, especially to the threaded area of the faucet. Pull it securely around the threaded part of the faucet. There should not be any extra tape overhanging from the faucet area from where the water is expected to come out. This can be a hurdle in the flow of the water.
- You can now screw the faucet tip over the tape. If you are looking at the additional tape, you can either remove the tape or ignore it.
- Cut the overhanging tape. Use a sharp device to remove it. If there is any scrap, peel it off.
- You can now work with leak-free faucets.
Wrap Up
This write-up is a comprehensive guide to install the hose and uninstall it whenever you need it.
The steps are easy to follow, and all you have to do is follow each step carefully. The process is not too complex either. In just a few steps the things can be easy for you.
I have collected all the information you need to attach and remove the water hose from the faucet.
If there is anything you would like to clarify, please let me know in the comments section below.
Leave a Reply