Wainscoting is quite an important question for homeowners and designers.
These wooden panels give any room a stylish and buttoned-up look.
It might not be considered as an element of interior décor, but its overall impact cannot be ignored.
It is a versatile wooden panel that can accentuate the domestic surroundings.
Wainscoting refers to the solid wooden panels used to cover the lower half of the wall to give the room a warmer appearance.
Over time the wainscoting is introduced in several formats and styles.
Wainscoting As A Solution For Bathrooms
The early wainscoting was made with wood.
Over time with more options coming into the market, it has become possible to buy the wainscoting in water-resistant materials like vinyl and PVC.
The wainscoting in these materials can add life and add years to the old tiles of the bathroom.
Instead of spending heavy amounts on replacing the tiles, it is better to use the wainscoting as an alternate.
Steps In Covering Tiles With Wainscoting
If you want to cover your tiles with the wainscoting, then here are the points that you need to follow the given instructions:
1. Start with preparing your walls.
Turn off all the water connections. If any water connection passes through or near the wall you want to wainscot, disconnect it from the main connection.
In the case of the pedestal sink, it is important to do temporary removal of the said. Also, remove all the accessories in the toilet. Be careful about electricity connections.
2. Measure and cut just the panel’s right size, also considering the impact of temperature on the dimensions of the space.
The expansion gaps are a must consider for some manufacturers. The measurements also need to consider the space required for the fixtures.
Measure their dimensions and their distance from all sides. Mark them accordingly on the wainscoting.
Cut them through and adjust them accordingly on the surface. Make holes using bigger drills for plumbing.
3. Make sure that you buy strong and secure adhesives to fix the panels.
Make sure to look for the instructions that are there to use the adhesive with the wainscoting.
Use the low-grit sandpaper to make the surface rough for ensuring a stronger bond. You can also switch between the adhesive or the caulk gun depending on the product you are using.
4. The ultimate step is making sure that the finishing is done to perfection.
If there is an expansion gap, simply add caulk there. Add the rail molding above the panels and baseboard molding underneath.
It is even possible to paint the wainscoting. The wainscoting in the bathroom needs additional application of multiple coats of primer.
Conclusion
The addition of wainscoting can help in improving the overall look of the bathroom.
The perfect fixing is possible when you follow the right instructions to install the wainscoting. It is a step by step process that requires complete care and vigilance.
It is essential to follow each step carefully to ensure that the bathroom tiles are covered properly with the wainscoting.
Read Also:
- How To Cover Ceramic Tile In Bathroom?
- What Tile Is Best For Bathroom?
- How To Seal Wood Floors In Bathroom?
- How To Level Bathroom Floor?
Leave a Reply