Bathroom faucets usually come with handles. To give a more aesthetic look, some designs come with screws and some screw-less.
Now, as the owner of the house, you may need to know how you can remove or replace these faucet handles.
If you’re new to this, you must be thinking, why would I need to remove the bathroom faucet handle?
Well, there are several reasons for which you would have to remove or replace bathroom faucet handles.
Let’s take a look!
Reasons To Remove Bathroom Faucet Handles
- You may want an updated design to have a new look.
- You may want to remove it for cleaning purposes which is an essential task.
- You may want to change the filter inside.
- You may want to remove it to check the reasons behind the leakage.
Faucets can sometimes get very dirty and be a cause of leakage.
Regardless of any reason, this article will show you a complete and comprehensive guideline on how to remove a bathroom faucet handle.
Step 1- Track Down The Screws
Generally, faucets are joined to sinks with the help of screws. No matter which types of screws are used, they are always concealed.
If your handle is in a circular shape, then you need to look around the sides. Small screws will be hidden inside. Screws may also be placed near the base of the faucet where the knob is placed.
If the faucet handle is long like a stick, works upside down, or functions by moving left or right, the screws may be placed out of sight. Now look again at the base; there would be some logo or design.
Usually, it’s a sticker used to cover the screws. Now you need to pick a razor knife to remove it off to find what you need.
Some other styles also have the same covering on screws placed in different locations. You just need to locate it first and then remove it.
Step 2- Take Out The Screws
Now take either a flathead or a cross-head screwdriver and start the work by matching the screw head. Make sure that the head matches well with the screw holes.
Then place the screwdriver on the screw and rotate it counterclockwise to loosen the grip. Continue rotating until the screw falls off the faucet handle. Sometimes the screws on the older faucets get rusty and full of grease, which makes the screws hard to remove.
For removing this thick grease, you need to use penetrating oil and then leave it for at least 20 minutes.
In this way, screws will be removed easily, and if the screws are too rustic, you need to leave them with penetrating oil for a whole day. It all depends on the thickness of the rust.
3- Remove The Faucet Handle
The removal method of the faucet varies from design to design and the style of manufacturing. But there are some general techniques to try out to remove the faucet handle.
Firstly, try to pull straight in an upward direction. In the case of older faucets, the only thing holding the faucets are screws.
So, only removing the screws will do the job. Other faucets also have pins other than the screws.
You need to grip the pin with either forceps or tongs and pull it up in such a case. Now, the faucet handle will be free and can be removed.
How to Remove Moen Bathroom Faucet Handle?
Okay, so previously, we talked about the removal of a basic faucet handle. Now we’ll go specifically through the Moen Bathroom Faucet Handle.
The purpose of faucet removal may be the same as cleaning it or updating it with the new style, but the technique would be different. However, the process would be easy and simple.
To remove the Moen Bathroom Faucet Handle, take a whip chain and use it in a counterclockwise position on the bottom of the faucet handle to loosen it from the grip. Then remove the nozzle of the faucet by using a hex key. Now take out the C-clips.
There are various types of Moen Faucet Handles. Each one is made up of a specific style. Some of them are fixed with screws, while some are screwless.
The removal process in every design is different. Some older designs were not made to remove the faucet handle. In such cases, you need to remove the entire faucet system.
Removing the faucet handle is not easy all the time. But you have to consider the following steps to get the job done.
Step 1- Unfasten The Faucet Handle
To loosen the grip of the faucet handle, grab the bottom of the faucet handle with the help of a shifting spanner. Rotate counterclockwise. Now use pliers to remove it.
Step 2- Remove The Faucet Spout
By using the stopper counterclockwise, which usually lies behind the sink, you can unfasten it. Once the rod gets loose, you can pull it upwards.
Once you get done with it, you need to take a hex head wrench 5mm and place it right on the top of the hole where the stopper rode was.
Now lose the set screw and remove the spout or nozzle.
Step 3- Disassemble The Faucet
Now, this is the step where you have to be a little careful. Now you have removed the spout, it’s time to move onto the next step. Move to the next setscrew with the help of hex-key.
Now all the key screws must be loose, the faucet handle will now be shaky and unfastened.
Step 4- Take Out The C-Clips
Removing the C-clips is going to be the last step in this procedure. Once you are done with the hassle of losing all the screws and locating the C-clips.
Now slowly remove the C-clips. To pull them out efficiently, use a flat-headed screwdriver.
How To Remove Moen Bathroom Faucet Handle Without Screws?
Now we will talk about Moen Bathroom Faucet Handle, which comes without screws, and removing or replacing it is a bit different from the ones that come with screws.
Faucet handles come with screws or without screws. Removing the faucet handle without screws is relatively easy as compared to removing the ones with screws.
But it can be done by following these easy steps:
Step- 1 Locate The Caps Or Buttons
Faucet handles that come without screws are usually fixed with caps.
Now again, as you do with the screws, first, you have to locate the caps. While locating the caps, look around all the sides.
Step-2 Take The Cap Out
Now you will be needing a flat-headed screwdriver to take the cap out. While inserting the screwdriver on the head of the cap, you need to be very careful because these caps can be very delicate.
Step-3 Pull Out The Screw
Once you are done with taking out the cap, you will see a single screw under the cap. Now again, you need a screwdriver to remove it.
Step 4- Go Ahead With Faucet Handle Removal
Once that single screw is removed, your faucet handle is good to go free from the base. You can remove it even with your bare hands.
If it’s not easy to remove with bare hands, you can use either pliers or a faucet handle puller to remove it.
How To Remove The Double Faucet Handle Without Any Screw?
Step-1 Turn Off The Water
Turning off the water is always a precautionary measure. No matter which style of faucet you want to remove, always turn off the water.
Step-2 Twist The Handle’s Base
Firstly, hold the faucet handle firmly in place, rotate the base of it counterclockwise. Now, remove it.
Step-3 Remove The Screw
Once you are done removing the base of the faucet, remove the screw which is placed inside. Hold the central piece of the faucet firmly.
Step-4 Pull Out The Cartridge
After the screw is out, it’s time to remove the white color cartridge setup placed below. You can remove it with the help of pliers and then replace it.
Sometimes people get really frustrated while removing them. It is always good to keep the manual book with you, which guides you properly step by step.
Some brands always offer full support in case of any problem or in the matter of replacements.
This is the modern era. Now everything is updated and comes in various styles and designs. The same is the case with bathroom faucets.
Although the aim is to secure the faucet and help water pass through without any hindrance. But now, some designs also come for vanity purposes to create an aesthetically pleasing look.
Designs that are sleek and stylish help improve the overall look of the sink. Because of this diversity in designs and so many options available on Amazon, removing the faucet handles could be different in each case.
I hope this blog has helped you navigate the methods of removing the faucet handles with screws or without screws.
For better results, you always need to know which sort of faucet handle you are dealing with.
Ensure which design you are using and always come up with a plan using the right manual guide.
This could improve the output of the hard work that you are putting in.