Are you planning to replace the sink faucet handle? Before looking for a replacement, it is important to see why you are changing the faucet.
It can cost you some bucks too. Therefore you cannot decide blindly. It is very important to take care of the replacement.
You are doing it for the better changes, therefore Look for the causes, and if there is no serious reason, there is no need to change it.
Reasons To Remove Bathroom Faucet Handles
There can be several reasons behind changing the faucet handle. Some just want a new one while the others are trying to correct some problem with the faucets.
If you are thinking to change the faucet, then there can be the following reasons for the replacement:
- You want a new faucet for the bathroom.
- Cartridge requires changing.
- The handle inside is not clean and needs a thorough cleaning.
- There is leakage
- The filter needs to be changed.
If you are about to change the bathroom faucet, then there can be three types of faucets that you might come across:
- Faucet handle with no screws but have a cap or button.
- Double faucet handles with no screws
- Lever style faucet without screws
These three types need to be handled in different ways.
Changing The Faucets With No Screws
1. Removing faucet handle with no screws but a cap
- Find the cap on the faucet handle that is on the side of the top.
- Pop-out the cap using a flat screwdriver. Simply slide it inside the gap and then gently remove it. It is very important to be careful, as some caps might break while removing.
- Disconnect the water supply.
- You will find a screw inside that you can remove with a wrench. Depending on the size of the screw, check the right-sized wench. Ensure you clog the drain so that the screws do not go down the drain if they slip accidentally.
- It is time to pull the faucet handle out. If it is hard to remove, use the pliers or faucet handle-puller to complete the job.
2. Removing the double faucet handle without screw
- Turn off the water supply.
- Grip the handle and then rotate the base in a clockwise direction to remove it.
- The base has a screw-in base. Replace it with the screwdriver.
- Just under the screw, there is a cartridge underneath. Use sharp-nosed needle pliers to take out the cartridge. It is even harder for many users. One easy alternative to all this is to get a new faucet.
3. Removing a lever style faucet handle without screws
- There are buttons marked hot and cold. Use a flathead screwdriver to remove the buttons after exerting pressure on the edges. It is very important to be careful where the buttons can be delicate. Plug the drain to prevent the buttons from falling into the drain.
- Usually under the button is the Allen Key, which requires a specialized Allen Key wrench.
- The faucet handle is ready to remove. You can pull it off. If the faucet has a cartridge, it needs to be exposed. In case there is no cartridge, there is no need to worry.
- Just under the Allen Key is the golden-colored piece. Remove it with your hands. If you think the cartridge is out of order and is not working properly, get it replaced.
There are several styles of faucet handles. The faucet handle is there to guard the faucet so that the water can pass through easily.
The faucet designs and styles can further the look of the bathroom. The pleasing visual appearance can add a glamorous look to the entire setup.
The faucet handles are attached to the faucets with and without screws. Removing these, therefore, requires a novel approach.
For the perfect replacement, it is very important to learn about the style, design, and above all, the reason for replacing the faucet handle.
- How To Clean The Aerator On The Kohler Bathroom Faucet?
- How To Remove Bathroom Faucet Handle Without Screws
- How To Install A Bathroom Light Fixture Without A Junction Box?