To remove a Nutone bathroom fan light cover all you have to do is open screws or clips of the fan and slide out the cover.
Is it actually that simple? Yes, it is but there are certain precautionary measures that you need to read ahead.
You should also know the importance of why we need to change the Nutone bathroom fan light cover. Read ahead to find out all!
Imagine you enter your bathroom, but the odor is so unbearable that you have to get out instantly. That’s not very ideal during an emergency visit to the toilet, right?
Thus, Keeping your bathroom fresh and clean is vital to good health, but keeping it so is difficult. That’s why bathroom fans are perfect for maintaining good air quality and hygiene.
The bathroom fan is also called the exhaust fan, and it is not the same as ceiling fans installed in rooms.
Nutone fans are installed on the roof or on any wall. When switched on, blades spin inside the fan, enabling the air from outside the bathroom to move inside and vice versa through ducts. This enhances the ventilation process and keeps the air fresh and clean.
What should your next step be after buying and installing the fan?
I thought the same as well. Merely installing the fan is not all you are supposed to do. You should be aware of some things:
- How to remove Nutone bathroom fan light cover?
- How to replace them quickly without calling an outsider to help you figure it out?
Firstly, know that it is necessary to open and clean the exhaust fan regularly because dust may enter the fan. It is exposed to the atmosphere all the time, and this dust can clog and hinder smooth blade movements.
Once you figure out how to remove the cover, replacing and cleaning becomes easier. Moreover, this task does not require special tools or electrician skills.
You can do it with a set of hand tools to remove the bathroom fan’s light cover, and you are good to go.
Wondering how to remove the Nutone bathroom fan light cover? Don’t worry, I have created a step by step ultimate guideline outlining the five simple steps to doing so.
Steps To Be Followed
Safety always comes first. Your first step is to switch the main power supply off. This is very important to avoid electrocution and keeping yourself safe.
Firstly, you should figure out which circuit breaker controls electricity for the bathroom. Then, you should shut the power down so that no current passes through, and then remove the fan without any fear.
However, keep a torch or other light source to have proper light while doing the task.
When I say the main power supply, I am not talking about the switchboard outside or inside your bathroom. Even if you switch it off, electricity will pass through it.
Mostly, the main power supply switch is located in the main circuit breaker panel. However, if you cannot identify which circuit breaker controls electricity in the bathroom, you should switch off the entire primary circuit. It is better than getting a shock, right?
Grab a stool or ladder and place it in your bathroom. Stand on it with all essential tools within your reach. These may be screwdrivers, cloth, bulb, rag, or a drill.
You should make sure that the ladder or stool you are using is safe, reliable, and is of the right height.
If you choose a tall ladder or a short one, then the task might become difficult. If your fan is on the ceiling, then a tall ladder should be used.
You can ask any member from your family to help you out by holding the ladder.
The next step is to take out the cover of the Nutone fan by holding the fan’s sides to have a grip on the fan, and pulling it down so that the cover clips are exposed.
You might be thinking, how can I do this on my own? It might seem tricky, but believe me! You can do it very easily without the hassle of calling and paying a mechanic.
After that, you should press the clips to pull the cover from the fan itself.
You must do it correctly. Why do you think I am saying this?
You might try to pull it on the sides, but that is not the technique for every bathroom fan.
The cover cannot be removed if there is a nut in the center. It depends on the model and style because each exhaust fan is not the same.
For example, if there is a screw at the center, made up of metal, you will first have to unscrew it clockwise and then pull it to remove the cover from the fan. If the fan is square and made up of plastic, you will have to squeeze the sides to remove it.
You will need a screwdriver if the screw heads are on the exterior side of the fan.
Once done, keep all the screws and the cover in a safe place; otherwise, you won’t be able to fix it back.
It might seem like a stressful job, but it is not. You can unscrew the cover using a screwdriver or by squeezing the sides. It depends on the Nutone model you own.
Afterward, you should unscrew the nuts that connect the black and white wires.
Imagine you forgot to switch off the main power. What would even happen while dealing with those wires! That is why do not skip step 1!
Moreover, you should check whether electricity has been appropriately cut or not. You can check this with a voltmeter reading. The reading needs to be 0.
The next step involves removing any tape that might keep the black and white wires together. It is essential to split them apart. You can use an ordinary knife for this with which you cut vegetables and fruits.
Now comes a little technical part where you will see a green terminal screw and a copper wire. Unscrew the wire from the green terminal screw.
After that, push the primary house wire from the electrical panel to free it from the Nutone assembly.
You can take out the bulb by smoothly rotating it anti-clockwise. You can clean it, repair it, and change the bulb very easily.
Isn’t it great how simple removing the fan light cover is? It won’t even take an hour. If you follow these simple steps, you will be able to remove it easily and safely.
What are you waiting for? You now have all the steps you need. Just grab your tools and get to work, but be safe!
Leave a Reply